Oliver 6320, Руководство пользователя, Страница: 10 / 56

10 | Page Oliver Machinery 6320 Sander
8. WORKPLACE SAFETY : Keep the floor around the machine clean. Scrap material, sawdust, oil, and
other liquids increase the risk of tripping or slipping. Be sure to clean up the table before starting the
machine. Make certain the work area is well-lighted and that a proper exhaust system is used to
minimize dust. Use anti-skid floor strips on the floor area where the operator normally stands and
mark off the machine work area. Provide adequate workspace around the machine.
9. ACCESS CONTROL should be enforced so only trained personnel can access the work area and operate
the machine. Use a childproof power switch when applicable.
10. STAY ALERT at all times. Do not operate this machine while under the influence of drugs/alcohol or
when not feeling well.
11. NEVER STAND ON THE MACHINE. This prevents injuries from tipping-related accidents and accidental
contact with cutters.
12. REPLACEMENT PARTS: Use only genuine Oliver Machinery replacement parts and accessories
recommended for this machine. Generic parts made by other manufacturers may create a safety
hazard and WILL void the factory warranty and other guarantees.
13. PROPER USE: Do not use this machine for anything other than its intended use. If used for other
purposes, Oliver Machinery disclaims any real or implied warranty and holds itself harmless for any
injury or damage which may result from that use.
14. ADDITIONAL SAFETY INFORMATION:
•
National Safety Council – Accident Prevention Manual for Business and Industry:
https://shop.nsc.org/apm-admin-program-14ed
•
ANSI 01.1: https://webstore.ansi.org/standards/wmma/ansio12013
•
OSHA 1910.213: https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.213