Oliver 10014, Руководство пользователя

Страница: 25 / 65

10014 Planer OLIVERMACHINERY.NET
25 |
Page
4. Rotate the set screws with a hex wrench to raise the extension tables. For each set screw, make
small, incremental adjustments, and then move on to the next set screw. Repeat until both
extension tables are in parallel with the planer bed. If a set screws become too difficult to turn, you
may need to slightly loosen the mounting bolts before continue to raise the extension table.
5. When the extension tables are in parallel with the planer bed, tighten all mounting bolts.
Recheck table parallelism for one more time.
6. Save these instructions as the extension tables will need to be adjusted from time to time.