Oliver 10014, Руководство пользователя

Страница: 23 / 65

10014 Planer OLIVERMACHINERY.NET
23 |
Page
Installing Height Adjustment Handwheel
1. To install the height adjustment handwheel,
you will need the key, nut and the washer.
They are taped onto the handwheel shaft.
Carefully remove the tape to retrieve these
parts.
2. Install the handle of the handwheel and
tighten with a 14mm wrench.
3. Insert the key into the keyway on
handwheel shaft.
4. Insert the handwheel and make sure the
keyway on the handwheel is aligned with
the key.
5. Install the washer and nut, then tighten the
nut with a 17mm wrench.
Installing Dust Hood
Use the provided cap screws and washer (#7 in “Inventory”), to mount the dust port on top of the
cutterhead cover: