Olec OLITE, Руководство по обслуживанию

Страница: 7 / 118

94MS20 Rev. B4 1-1
1. Introduction
This manual is designed for technical personnel and is written to provide
an understanding of the equipment, as well as a plan for troubleshooting.
All
OLEC
lights respond to existing conditions. There are no fixed
cycles or timers. This allows the unit to respond correctly to conditions
that are not normal to operation, such as power failure or surges. Learning
what conditions cause the various responses will guide you to the
solutions.
This manual was written in several sections, each to provide information
in a different manner or specialized locations. Here is a quick guide to
the sections.
Features: A comparison between our lights and conventional light
sources, with an explanation of each feature, is provided to demonstrate
why we chose to design a light source so different from other sources.
Component Layout: Where to look for components referred to in the
manual.
Note: The AL9 and AL13 units are very similar. The AL15, ALI15,
AL19, AL20, AL23 (power supply only for the AL23) units are
very similar but some have fewer parts. The AL23 (lamphead
only for the AL23) AL25, AL25-2, AL35, AL50, AL53, AL54,
AL54-480, AL55, AL55-480, AL56, AL56-480, AL83, AL84,
AL84-480, AL85 and AL100 (power supply only for the AL100)
units are very similar but some have fewer parts. The AL100
lamphead shares some of the same internal components with the
other lampheads but the arrangement is quite different.
Troubleshooting: An outline of where to look for various symptoms.
This guide refers to the more detailed information in the general
information section that follows.
General: Contains specific information about the components in the
light and the path of the signals and power. It can be used for information,
or used with the troubleshooting guide.
Lamp Head Signals: Provides information about all the conductors to
the lamp head, their functions, and the voltages present.
Light Function States: A chart of the different functions the board
directs and the conditions that cause these functions. There is also a
description of the states.
Printed Circuit Board Pins: Provides the pin-outs from the printed
circuit board and an explanation of each.
Schematics: Full-unit schematics are provided. They are for the AL 9,
AL 13, AL 15, ALI 15, AL19, AL20, AL23, AL35, AL50, AL53, AL54,
AL54-480, AL55, AL55-480, AL56, AL56-480, AL83, AL84, AL84-
480, AL85, AL100.