Oldham MX 32, Руководство пользователя

Страница: 46 / 72

42 MX 32
v2
User Manual
3. Inputs and relays records
This displays, for each relay and logic input concerned: activated relay/input
ID, type (REL = relay, EL = Logic input), its status (activated = ON,
Deactivated = OFF) as well as the date and time of occurrence or release.
Delete allows for the deletion of this entire file. Up to 512 events can be
memorized. Beyond that, the most recent event deletes the oldest.
Previous page, Next page, and Last page access the corresponding pages
of the file.
Message Significance
RELAY Status change of the designated relay.
INPUT Status change of the designated input.
Table 13: Relay and logic input file messages.
4. Working conditions records
This displays the actions carried out on the MX 32 (simulation mode,
calibration mode, programming mode, release request, operation on internal
battery), as well as the date and time of beginning and end of the event.
Delete allows for the deletion of this entire monitoring file. Up to 512 events
can be memorized. Beyond that, the most recent event deletes the oldest.
Previous page, Next page, and Last page allow access to the corresponding
pages of the file; each page can display a maximum of 8 lines.
Message Significance
Line 1 On/Off Start or stop line 1
Line 2 On/Off Start or stop line 2
Detectors On/Off Start or stop the detector
External ack. Press the external acknowledgement button
MX 32 ack Acknowledgement by the acknowledgement button on the front plate of
MX 32
Simulation Switch to simulation mode
Calibration At least one of the detectors is selected in calibration mode.
Test detectors Switch to test mode
Program Programming done on MX 32
Time settings Time settings on MX 32
Table 14: Operation monitoring file messages.
5. Hardware troubles records
This displays, for each material incident detected: incident ID, status
(activated = ON or deactivated = OFF) as well as the date and time of
occurrence or release of the event.
Previous page, Next page, and Last page allow access to the corresponding
pages of the file: each page can display a maximum of 8 lines.
Message Significance
DEAD Digital module no longer responding (line cut, module failure, wrong address,