Oldham MX 32, Руководство пользователя

Страница: 18 / 72

14 MX 32
v2
User Manual
Icon
Function

Orange indicator of low- range excess (UDS: Under scale, low-range excess). This
value is adjustable from 0-10% of the range.
- Off: The measurement is higher than the UDS value programmed.
- Lit: The measurement is lower or equal than the UDS value programmed. The
alarms of the relays are activated in accordance with the programming. In
parallel, the display indicates « < ».
Reset of the UDS is automatic once the failure is fixed.
FAULT Orange failure indicator
- Off: No Fault
- Solidt: Communication problem with one of the modules or invalid detector
measurement, that is to say either below -10% of the range or above 110% of
the range.
- Blinking: Controller in maintenance mode (test, calibration).
Reset of the FAULT is automatic once the failure is fixed.
POWER
Green start/stop indicator for the detectors/modules of the zone.
- Off: All detectors of the corresponding zone have been turned off
- Solid: At least one detector of the corresponding zone is communicating
- Blinking: Detailed information of one detector of the corresponding zone are
currently displayed on the LCD screen.
Flash and siren (D and E)
Siren (
Figure 9: MX 32
’s
front plateE)
Available as an option, adjustable from 85 to 100dB, it complements the
internal buzzer and is configured via
COM 32 configuration software.
Flash (
Figure 9: MX 32
’s
front plateD)
Available as an option, blue or red, is configurable via COM 32 .
Status indicators (F and G)
These two indicators reflect the status of the MX 32 .
Icon Function
Green indicator denoting the power supply status
- Solid: Voltage input is OK
- Off: Voltage input is below 22Vdc
Failure/maintenance orange indicator
- Off: No failure detected
- Solid: Presence of some failure (controller, detector, communication, memory). The
alarm clears automatically once the failure is fixed.
- Blinking: MX 32 in maintenance mode (test, calibration).