Oldham MX 32 Скачать руководство пользователя страница 44

Страница: 44 / 72

MX 32

User Manual

4. Maintenance

Access

Successively press the keys

Menus

and

Maintenance

1. Line On/Off

Sets the line to stop (the line is not powered and the detectors are at stop; no
event can be generated from then on).

2. Detector On/Off

Sets the detector to stop (no event can be generated from then on) if it was
not issuing an alarm or failure.

3. Test On/Off

This allows for the verification of the proper operation of a detector. In this
mode, recordings and alarm relays are suppressed.

4. Simulation

Upon its selection,

the message “The controller no longer ensures detection”

is displayed.

■

The controller no longer keeps account of inputs (detectors, logic inputs).

■

The simulation measurements/status are initialized to the current

measurement/status values. The relays, the internal buzzer, and the
analog outputs remain in their current status.

■

The screens, management of relays, outputs, etc. are those of Normal

operation.

■

The internal relay and the common default LED are activated.

■

To change the value of a detector, use the



keys to increase or

decrease the measurement value simulated from

–15% to 115%. For a

logic input, use the



keys to select the input,



to select

Alarm

Alarm Off

■

The banner of alarms does not appear.

■

The events log indicates

Begin Simulation

and

End Simulation

■

Exit the simulation mode by pressing the

End simul

key. Automatic

release then occurs and resets the average values to zero. The current
measurements are displayed once more.

Содержание MX 32









































































Результаты поиска

Содержание MX 32

Отзывы:

Похожие инструкции для MX 32

Бренды по названию

Популярные бренды

Oldham MX 32, Руководство пользователя

Результаты поиска

Содержание MX 32

Отзывы:

Похожие инструкции для MX 32

Бренды по названию

Популярные бренды