OKM Rover UC, Руководство пользователя

Страница: 22 / 34

5.4 PINPOINTER
As the name Pinpointer already indicates, it allows you to pinpoint potential targets more pre-
cisely. Furthermore, it offers a basic target discrimination to discriminate between ferro-
magnetic and non-ferromagnetic metals as well as tunnels, voids and cavities.
Usually, this operating mode is used after you have performed a complete measurement with the
operating mode 3D Ground Scan. It is mainly used to analyze the detected structure in detail. Due
to the analysis of the scan results in the mode 3D Ground Scan you can determine the position of
a located object.
5.4.1 Performing a Pinpointer Scan
In this operating mode all measured data will be directly displayed in the OKM Rover UC App.
During pinpointing the probe must be held vertical to the ground. DO NOT turn, swing or pivot the
probe!
1
Power on the detector and the Smartwatch. Start
the Rover UC App and select the operating mode
Pinpointer .
2
The Bluetooth connection to the detector will
be established automatically.
As soon as the Bluetooth connection is
established successfully, the Trigger LED
turns
blue .
3
Move the probe slowly in any direction:
back and forth, to the left and to the right.
Try to capture the complete object by measur-
ing beyond its edges. Repeat this a few times
to get a clear signature of your target.
Make sure you hold the probe vertically to the
ground, avoid rotating, pivoting and swinging.
The scan results are displayed in real-time on
the Smartwatch screen.
As soon as a strong signal is detected, the
values will reach its peak when the probe is
directly above the detected object.
To pause the scan, tap on and continue
with
To finish the scan and return to the App main
menu, tap on the back arrow
90°
22 / 34