manualshive.com logo in svg

OKIDATA Pacemark 3410, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA Pacemark 3410 Скачать руководство пользователя страница 210

Page: 132

Service Guide PM3410

Chapter B Illustrated Parts Listing

 
B.1 OVERVIEW

B.1.01 General Information

This appendix will assist you in identifying the assemblies and parts of the product.

Use Section Four (Failure Analysis) to determine the defective part(s).

Locate the part and its part number in this section.

Appendix B is cross-referenced to Section Three (Maintenance).

Format

The format for this appendix is a series of tables with diagrams. The tables contain the item reference 
number, the Okidata and Oki-Japan (Oki-J) part numbers, the part description, a comments section, and 
the disassembly procedure.

Items with the comments RSPL (Recommended Spare Parts List), Consumable, Document, or Option are 
available from Okidata. Items without these comments are usually not stocked.

Some items are only available as assemblies. Every effort has been made to clearly indicate which items 
are in assemblies and which are not.

N/A will appear where a part number is not available.

Current Part Numbers

Please refer to either of the following resources for current part numbers and pricing.

Okidata's Electronic Bulletin Board (Okilink II) contains current part numbers, prices, and 

recommended stocking levels for each item listed as a recommended spare part. For instructions on 
accessing Okilink II, refer to the Service Center Reference Guide.

Okidata's Faxable Facts is an automated fax document retrieval system. Part numbers and pricing are 

available through Faxable Facts. For instructions on accessing Faxable Facts, refer to the Service 
Center Reference Guide.

REMEMBER

Current part numbers, recommended stocking levels, and pricing information are available through Okilink 
II and Faxable Facts. Refer to the Service Center Reference Guide for information on accessing these 
resources.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Содержание Pacemark 3410


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды