OKIDATA Pacemark 3410, Руководство по обслуживанию

Страница: 122 / 249

Print Suppress
Effective Yes No Determines whether
the DC3 code causes
the printer to ignore
data until a DC1 code
is received.
Auto LF No
Yes
Auto CR (IBM only) No Yes
CSF Bin Select Bin 1 Bin 2 Only available when the
dual bin cut sheet
feeder (CSF 3002) is
installed. Determines
which bin is active.
SI Select Pitch (10 cpi -
IBM ONLY) 17.1
15 cpi
Sets the pitch of
condensed mode from
10 cpi using the SI
code.
SI Select Pitch (12 cpi -
IBM ONLY) 20 12 cpi Sets the pitch of
condensed mode from
12 cpi using the SI
code.
Time Out Print
(Epson/IBM) Valid Invalid When set to Valid
contents of the buffer
will print when
additional data is not
received for a
predetermined amount
of time.
Auto Select
No Yes
Sensor Disable No
Yes
Group Item Setting Notes
Parallel I/F I-Prime
Buffer Print Line End
Invalid
Buffer Print = I-Prime
makes printer print
contents of buffer. Line
End = I-Prime makes
printer print to the end
of the current line.
Invalid = I-Prime the
signal is ignored.
Pin 18
+5 0 V
Determines whether
voltage is supplied to
pin 18.