OKIDATA Pacemark 3410 Скачать руководство пользователя страница 140

Страница: 140 / 249

Page: 86

Service Guide PM3410

Chapter 3 Maintenance & Disassembly

3.6.02 All Other Returns

CAUTION:

The product MUST be returned in the original packaging.

The product MUST be returned with ALL originally supplied factory items.

Be sure to secure the printhead so it will not move during shipment.

1. Locate the original packaging or order replacement packaging from Okidata.

(Refer to Appendix B)(

2. Locate the originally supplied factory items. (Refer to

Setting Up

in the Printer Handbook)

3. Make sure the printhead is secured so it will not move during shipment.

4. Pack the unit, using the materials from Step 1.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Содержание Pacemark 3410






















































































































































































































Результаты поиска

Содержание Pacemark 3410

Отзывы:

Бренды по названию

Популярные бренды

OKIDATA Pacemark 3410, Руководство по обслуживанию

Результаты поиска

Содержание Pacemark 3410

Отзывы:

Бренды по названию

Популярные бренды