![background image](http://html1.mh-extra.com/html/okidata/ol400/ol400_service-manual_3697857075.webp)
Page: 60
Service Guide OL400
Chapter 3 Maintenance & Disassembly
3.3.02 Actual Page Count
General Information
The actual page counter counts the number of sheets printed by the printer.
Procedure
To display the value of the actual page counter, follow this procedure.
1. Power ON the printer while pressing Switch 1 on the Engine Controller Board. The LED
(located on the Engine Controller Board) will flash once - then pause (the LED will continuously
flash once - then pause) indicating that the printer is in Parameter 1 of the maintenance mode.
2. Press Switch 1 for five seconds. The LED will display the contents of the Parameter1 (Actual
Page Counter) register as follows:
a.
The long flash indicates start of count.
b.
Short flashes indicate counter contents (most significant digit first). There will be a
pause between digits.
c.
Upon completion of the count,a long flash will indicate start of count.
d.
This process will loop until you press Switch 1 for five seconds. This will cause
the
modified page count to be displayed. (refer to 3.3.02)
Example
Actual Page Counter = 235 pages
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)