background image

TonerRefillKits.com

  

RechargX™ RX180 v2

Mon - Fri  8am - 5pm ET                     

© 1995-2012 ReChargX™, EmptyX, TonerRefillKits and TonerRefillKits.com, the TonerRefillKits logo, the  

2012.02.21

800.527.3712 or 352.343.7533                 ReChargX™ and EmptyX logos are trademarks owned by TonerRefillkits, LLC. All rights reserved. 

Page 1 of 10

ReChargX™ RX180 Instructions

For use in the Samsung MLT-D105S and MLT-D105L 

toner cartridges

The  Samsung  MLT-D105S  and  MLT-D105L  are 

the  toner  cartridges  most  frequently  found  in 

the  Samsung  ML-1910,  ML-1915,  ML-2525, 

ML-2525W,  ML-2580N,  SCX-4400,  SCX-4600, 

SCX-4623F, SCX-4623GN, SF-650, SF-651 and 

all other machines using the same underlying 

“engine” (figure 1).

These  two  toner  cartridges  are  quite  easy  to 

refill using our ReChargX™ RX180 Premium Print 

Toner Refill Kits.

Within these ReChargX™ RX180 Premium Print 

Toner Refill Kit instructions, we will be adding new 

toner, removing the waste toner and replacing 

the cartridge reset chip.

MLT-D105S: Please refer to figure 1a.

MLT-D105L: Please refer to figure 1b.

Step 1: Orient the Toner Cartridge

Orient the cartridge on your work surface with 

the handle toward your chest (figure 2).

In this orientation the cartridge reset chip will 

be away from you, shown by the white arrow 

in figure 2.

Figure 1a

: The Samsung MLT-D105S toner cartridge

Figure 1b

: The Samsung MLT-D105L toner cartridge

é

Figure  2: 

Cartridge  oriented  with  the  cartridge  handle 

and label toward your chest

Summary of Contents for ReChargX RX180











Reviews: