➥
56
OKIPAGE
12i
User’s Guide
Health Hazard Data
Routes of Entry
: Inhalation, Ingestion, Eyes, Skin.
Health Hazards
:
1. Styrene-Butyl Acrylate Copolymer
Subcutaneous implantation of polymeric
styrene powder in rats has induced tumors at the site of implantation.
Preparation Date: October 25, 1998
2. Carbon black
(Group 2B Possible Carcinogen; IARC)
Overexposure to carbon black is associated with causing irritation,
conjunctivitis, and corneal hypoplasia of the eyes; minor
irritation and eczema of the skin; and throat irritation and bronchitis.
Long-term inhalation exposure may be associated with
causing lung cancer.
3. Paraffin Wax
(Group 3 Not Classifiable; IARC)
May cause eye, skin, respiratory, and digentive tract irritation.
Paraffin is an equivocal tumorgenic agent by RTECS criteria.
4. Amorphous Fumed Silica
(Group 3 Not Classifiable; IARC)
Overexposure to amorphous silica has been associated with causing
irritation of the lungs and pneumoconiosis.
Long-term inhalation exposure may be
associated with producing tumors in laboratory animals.
Reactivity Data
Stability: Stable
Polymerization
: Will not occur.
Hazardous Decomposition Products
: Thermal
decomposition may result in release of oxides of carbon and nitrogen.
Temperature
: Do not expose to temperatures above 200
°
C (392
°
F).
Incompatibility
: Avoid exposure to strong oxidizers.
Spill Cleanup and Disposal
Spill Cleanup
Small Spills
1.
Remove sources of ignition.
2. Clean up spill with wet cloth.
Large Spills
1.
Remove sources of ignition.
2. Wear protective gear: respirator, rubber
gloves, goggles (see below)
3. Clean up spill with scoop,
being
careful
not to generate a lot of dust.
Waste Disposal
: Follow appropriate federal, state and local regulations.
Safe Handling and Use
Respiratory Protection
: Not normally required. For large spills, use
NIOSH-approved full face-piece respirator with HEPA cartridge
during cleanup.
Protective Gloves and/or Eye Protection
: Not normally required. For
large spills, use rubber gloves and chemical workers goggles during
cleanup.
Ventilation
: Outside of normal ventilation, not normally required.
Other Protective Equipment and/or Hygienic Practices
: None
Special Precautions
Precautions for Handling or Storage
: Protect from high heat. Avoid
making dust.
Other Precautions
: None
The information contained in this MSDS is based on data considered accurate; however, no
warranty is expressed or implied regarding the accuracy of these data or the results to be
obtained from the use thereof. Vendor assumes no responsibility for injury to vendee or
third person party proximately caused by the product if reasonable safety procedures are
not adhered to as stipulated in the MSDS. Furthermore, vendor assumes no responsibility
for injury to vendee or third person party proximately caused by abnormal use of the
product even if reasonable safety procedures are followed. Additionally, vendee assumes
the risk of his use of the product.
Содержание OKIPAGE 12i Series
Страница 1: ...OKIPAGE 12i Digital LED Printer User s Guide ...
Страница 10: ......