Oki OKIFAX OF5900, Руководство по обслуживанию

Страница: 168 / 472

OKIFAX 5700/5900 2 - 78
No. Item Specifications
Determine whether ECM transmission is to be performed.
1) Setting values
ON (ECM transmission performed)/OFF (ECM trans-
mission not performed)
Set up closed network.
The TSI/CSI of the remote machine is compared with the
low-order 4 digits of the speed dial of the local machine.
If they match, closed network is performed. If they do not
match, closed network is not performed.
1) Setting values
OFF: Closed network is not performed.
TX/RX: Closed communication is performed for both
transmission and reception.
RX: Closed communication is performed only
for reception.
Determine whether toner saving is to be performed
during fax printing.
When a LAN/PC printer is used, this setting is ignored
and the command from the host is executed.
1) Setting values
ON (Toner saving performed)/OFF (Toner saving is
not performed)
Determine whether the sender ID is to be added to the
sending data.
A maximum of 32 characters are added to only outside
the document.
1) Setting values
ON (Added)/OFF (Not added)
Set the size of recording paper in the first cassette.
As the recording paper size is not detected automatically,
the operator must set it. EXEC./JIS-B5/A5/A6 can be set
only when LAN is mounted.
1) Setting values
A4/LETTER/LEGAL 13/LEGAL 14/EXEC./JIS-B5/A5/
A6
* The setting data must be transferred to the G4
board.
20 ECM function
21 Closed network
22 Toner save
23 Sender ID
24 1’st paper size
Table 2.9.5.3 Machine Settings (4/5)