Oki OKIFAX OF5900, Руководство по обслуживанию

Страница: 133 / 472

OKIFAX 5700/5900 2 - 43
No. Item Specifications
Set the FAX signal attenuator (level).
• Since the maximum send signal power level (dB) of the
fax is at 0dB, you can select 0dB to -15dB in one dB
steps for the send signal power level.
1) Setting values
0-15 dB se;ectable (in 1 dB steps): except FRE
FRE: 7-15dB
In case Country code is changed in FRE, Forcibly, set
to 7dB when the attenuator setting values are set
between 0dB to 6dB.
* Enter a value with ten-keys.
Note: The send signal power level should meet your
country’s regurations. Some country’s may specify
the power level at telephone exchange.
In that case, you should substract the specified
level from the line cable attenuation to determin
the send level of your fax.
Set the T/F pseudo ring back tone signal attenuator
(level).
1) Setting values
0-15 dB selectable (in 1 dB steps)
* Enter a value with ten-keys.
Set the MF signal attenuator (level).
1) Setting values
0-15 dB selectable (in 1 dB steps)
* Enter a value with ten-keys.
Set a ring detection time within the range from 100 ms to
990 ms.
1) Setting values
10-99 selectable (in 10 ms steps)
* Enter a value with ten-keys.
* Actual value = (Set value) x 10 ms
Suppose the set value is 12, then
12 x 10 ms = 120 ms
Set a line seizure timing within the range from 100 ms to
1900 ms.
1) Setting values
1-19 selectable (in 100 ms steps)
* Enter a value with ten-keys.
* Actual value = (Set value) x 100 ms
Suppose the set value is 03, then
03 x 100 ms = 300 ms
21 Attenuator
22 T/F tone attenuator (for TEL/FAX
switch)
23 MF attenuator
24 Ring duration detection time
*10 ms
25 CML timing *100ms
Table 2.9.2.3 Technical Functions: Setup (7/11)