Oki OKIFAX OF5900, Руководство по обслуживанию

Страница: 470 / 472

OKIFAX 5700/5900 H - 3
2. Quick Set-up Manual for RMCS Model 30
This procedure should be used in conjunction with the main documentation supplied and is
designed only as a brief set up and operation procedure.
The set-up for the RMCS is from a PC to a FAX modem. This FAX modem unit is the CON-
TROL or CENTER unit.
The receiving fax unit is connected to the control fax through the telephone line cables. This
unit is called the REMOTE unit.
Note: The REMOTE unit must have Remote Diagnosis set to ON (Machine setting 14).
CONFIG.SYS in CENTER PC must have the following added
DEVICE = C:\DOS\ANSI.SYS
DEVICE = C:\DOS\EMM386.EXE
Items 2-1, 2-2 and 2-3 need only be carried out for the initial installation.
And Item 2-3 is needed only for operator to treat the .BIN files i.e. Program, Default and Lan-
guage files.
2.1 Installation of RMCS Disc
Insert the "SYSTEM DISC" into drive A and set PC for drive A:
A>INST enter (INSTALL MENU will be displayed.)
Select item 1 (RMCS SETTING) from the menu
Hard disk drive = [c] enter
Directory = [c:\RMCS_ ] enter
Password = [*******] type in password and press enter
Dipswitch enter (this is only for RMCS Model 10)
Are you sure Y enter
2.2 Installation of FAX Disc
Remove SYSTEM DISC from drive A and insert the "FAX DISC" (FX-056/176).
Select item 2 (FAX SETTING) from the menu, then the message is displayed as below.
Fax Disk set
Push any key
(After pushing any key, the message will be added as below).
FX-056 (for example)
Ver 02.00
Are you sure (Y or N) Y
enter (FAX DISC data will now be installed to the PC.)
2.3 Installation of PROGRAM/DEFAULT/LANGUAGE files
With the FAX DISC in drive A run the Binary File Manager program:
A>BFM enter (Then Binary File Manager MENU will be displayed.)
Select [0]: STORE FILE
Remove FAX DISC from drive A and insert a disc containing the .BIN files. Use the arrows key
to highlight the file to be stored and then press enter. Press ESC to return to the menu and
then terminate.