36
Dial Directories
English
5
After the display clears, enter the main fax number.
Refer to the instructions below.
6
Press the Start key.
7
Enter the Location ID. This is a descriptive title up to
16 characters long. Refer to the instructions below.
To Do This
Use
Enter numbers
Numeric keypad
Enter spaces
Space One Touch key
Enter hyphens
Hyphen key
Enter pauses (i.e., to wait for
long distance or outside lines)
Pause key
Add a switch from pulse to tone
dialling for part of the call
*/Tone key
Move the cursor to make
corrections
Yes
F
and NO
E
keys
To Do This
Use
Enter numbers
Numeric keypad (press once)
Enter spaces
Space One Touch key
Enter hyphens
Hyphen key
Enter alphabet
characters
Locate the character you want on
the numeric keypad. Press that
key repeatedly until the character
appears.
8
Press the Start key. The display will show NO=<OR
LOCATION>.
9
Enter the alternate fax number. Refer to the
instructions following Step 5.
10
Press the Start key to finish programming the One
Touch key. The Display will show LOCATION
PROGRAMMING.
11
To continue programming One Touch keys, go back to
Step 3. If you are finished programming, press the
Select Function key.
12
Lift off the plastic cover above the One Touch label.
Using a pencil, write in the name for your newly-
programmed One Touch key. Then replace the cover.
Enter a unique
character
Press the 0/Unique key repeatedly
until the character you want
appears. The following characters
are available:
! # & ‘ ( ) * + , – .
/ : ; = ? · ä ß ñ ö ü Æ Å Ø æ
å ø
Enter two letters
using the same key
Press the NO
E
key to move to
the next character
Move the cursor to
make corrections
Yes
F
and NO
E
keys
To Do This
Use
