Oki MC860 MFP, Руководство по обслуживанию

Страница: 54 / 391

43967002TH Rev.1
54 /
Oki Data CONFIDENTIAL
3. Installation
3.1 Warnings and prohibited items
Warning
• Do not install the MFP in the place that experiences high temperature or in the
location near fire.
• Do not install the MFP in the locations (such as experimental laboratory) where
chemical reaction occurs.
• Do not install the MFP near inflammable solvents such as alcohol and thinner.
• Do not install the MFP within the reach of small children.
• Do not install the MFP in the unstable locations (such as shaky table or slanted
floor).
• Do not install the MFP in the locations which are highly humid or dusty or
locations exposed to direct sunlight.
• Do not install the MFP in the environment with sea wind or corrosive gas.
• Do not install the MFP in the locations which are subject to vibrations.
• If the printer is dropped or cover is damaged, disconnect the AC power plug
from the power supply source and contact your Oki contact point. Failure to observe
the caution may result in electric shock, fire and physical damage.
• Do not make any connection of the power cord, printer cable and earth wire
other than which are instructed by the Manual. Failure to observe the caution may
result in fire.
• Do not insert any object into the ventilation holes. Failure to observe the caution
may result in electric shock, fire and physical damage.
• Do not place cup with water on top of the printer. Failure to observe the caution
may result in electric shock and fire.
• When the printer cover is opened, do not touch the fuser unit. Failure to observe
the caution may result in burn injury.
• Do not throw toner cartridge or image drum cartridge into fire. Failure to observe
the caution may result in burn injury by the dust explosion.
• Do not use highly inflammable spray near the printer. Inside of the printer gets
very hot that can cause fire.
• If the cover gets abnormally hot, or the printer smokes, or smells strange odor,
or generates abnormal sound, disconnect the AC power plug from the power supply
source and contact Oki contact point. Failure to observe the caution may result in fire.
Warning
• If liquid such as water gets inside of the printer, disconnect the AC power plug
from the power supply source and contact Oki contact point. Failure to observe the
caution may result in fire.
• If foreign material such as paper clip is dropped inside the prnter, disconnect
the AC power plug from the power supply source and remove the foreign material from
the printer. Failure to observe the caution may result in electric shock, fire and physical
damage.
• Do not perform any operations other than what are instructed by the Manual,
or do not disassemble the printer. Failure to observe the caution may result in electric
shock, fire and physical damage.
Caution
• Do not install the printer in the locations where ventilation hole is blocked.
• Do not install the printer directly on the thick-piled carpet.
• Do not install the printer in the locations such closed room where ventilation is
poor.
• If the printer is used for long hours contiuously in a small room, good ventilation
should be proved.
• Install the printer in the locations which are far from strong magenetic field or
from device generatig noise.
• Install the printer in the locatios which are far from video monitor or TV receiver.
• When moving the printer, hold both sides of the MFP.
• The printer is heavy weighing approx.40 kg. Two or more persons should work
together to raise the MFP when moving it.
• Keep off the paper unloading unit while the printer power is turned ON, and
while printing is progress. Failure to observe the caution may result in physical damage.
Be sure to explain the precautions on installation and operation to clients while showing
precautions of the User fs Manual. Explain full details of AC power cord and earth wire
especially to clients.