Oki MB780 Скачать руководство пользователя страница 247

Страница: 247 / 303

Try one or more of the following:

•

Touch

Continue

if no scan job is active when the attendance message appears. This clears the message.

•

Touch

Cancel Job

if a scan job is processing when the attendance message appears. This cancels the job and

clears the message.

•

Touch

Scan from Automatic Document Feeder

if the page jam recovery is active. Scanning resumes from the

ADF immediately after the last successfully scanned page.

•

Touch

Scan from flatbed

if page jam recovery is active. Scanning resumes from the flatbed immediately after

the last successfully scanned page.

•

Touch

Finish job

without further scanning if page jam recovery is active. The job ends at the last successfully

scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail,
or FTP.

•

Touch

Restart job

if job recovery is active and you are able to restart the job. The message clears. A new scan job

containing the same parameters as the previous job starts.

293.02 Flatbed Cover Open

Close the scanner cover.

840.01 Scanner Disabled

This message indicates that the scanner has been disabled by the system support person.

841-846 Scanner Service Error

Turn the printer off.

Unplug the power cord from the wall outlet.

Check all cable connections.

Connect the power cord to a properly grounded outlet.

Turn the printer back on.

If the service message appears again, then contact Customer Support, and report the message.

900–999 Service <message>

Turn the printer off.

Unplug the power cord from the wall outlet.

Check all cable connections.

Connect the power cord to a properly grounded outlet.

Turn the printer back on.

If the service message appears again, contact Customer Support, and report the message.

Understanding printer messages

247

Содержание MB780
















































































































































































































































































































Результаты поиска

Содержание MB780

Отзывы:

Похожие инструкции для MB780

Бренды по названию

Популярные бренды

Oki MB780, Руководство пользователя

Результаты поиска

Содержание MB780

Отзывы:

Похожие инструкции для MB780

Бренды по названию

Популярные бренды