Oki CX4545 MFP, Руководство по копированию

Страница: 76 / 194

3 BASIC COPY MODES
74 Selecting Finishing Mode
Requirements for saddle stitching
*1 When the paper weights are mixed, take the value of the heavier one.
*2 1 cover sheet (64 to 256 g/m
2
(17 lb. Bond to 140 lb. Index)) can be added. In this case the number of sheets per set shall include the
cover sheet.
The magazine sort mode can also be selected on the EDIT menu. If you select it on the EDIT menu, you can adjust the
binding margin. For details, see the following page:
 P.103 “Magazine Sort Mode”
1
Place paper in the drawer(s).
Special paper such as OHP film or sticker labels is not applicable.
2
Select the desired paper size.
A3, A4-R, A5-R
*1
, B4 or B5-R
*1
size paper can be used.
*1 A5-R and B5-R are acceptable only for the magazine sort mode.
3
Place the original(s).
When placing the originals on the RADF (optional), place them according to the illustration on the previous page.
When placing the originals on the original glass, place them in the following order:
Magazine sort, Magazine sort & center fold, Magazine sort & saddle stitch: Place the first page of the
original first.
Center fold, Saddle stitch: For example, if the total number of pages is 12, place pages 1 and 12 together,
and then pages 2 and 11, 10 and 3, 4 and 9, 8 and 5, and finally pages 6 and 7.
Paper size
Paper weight
*1
Maximum number of
sheets available for saddle
stitching
*2
Maximum number of sets loadable on
the saddle stitch tray
A3, A4-R, B4,
LD, LT-R, LG
64 - 90 g/m
2
(17 - 24 lb. Bond)
15 sheets
11 - 15 sheets: 25 sets (10 sets if cover sheets
are added)
6 - 10 sheets: 30 sets (15 sets if cover sheets
are added)
Less than 5 sheets: 50 sets
91 - 105 g/m
2
(25 - 28 lb. Bond)
10 sheets
6 - 10 sheets: 25 sets (15 sets if cover sheets
are added)
Less than 5 sheets : 40 sets (30 sets if cover
sheets are added)
When placing portrait originals in a landscape direction as shown on the
right in the magazine sort mode, magazine sort & center fold mode or
the magazine sort & saddle stitch mode, set the image direction function
to ON on the EDIT menu.
 P.122 “Image Direction”