Oki C931dn, Руководство пользователя

Страница: 56 / 147

- 56 -
Turning ON/OFF the Power
Appendix
Printing
3
Setting Up
2
B
efore use
1
Basic D
evice Oper
ations
4
Index
z
⿟
Turning ON/OFF the Power
Power Supply Precautions
WARNING
There is a risk of getting
an electric shock and/or
causing fire.
z
Be sure to cut off the power supply when
attaching or removing the power supply plug
or the earth wire.
z
Be sure to connect an earth wire to the
grounding terminal of exclusive use.
z
Please do not connect with the ground of a
water pipe, a gas pipe, and a telephone wire,
or lightning rod without fail.
z
Make sure to connect with the ground terminal
before connecting the power cord to the
power supply plug.
z
Be sure to perform extraction and insertion of
the power cord with a power supply plug.
z
Insert the power supply plug into the wall
socket securely.
z
Do not touch the power cord, or machine, if
your hands are wet.
z
Install the power cord in a location where it will
not be stepped on, and do not place objects on
the power cord.
z
Do not twist, bind, or knot the power cord.
z
Please do not use a damaged power cord.
z
Do not carry out foot wiring.
z
Do not connect this machine and other electric
products to the same wall socket. If connected
simultaneously with an air-conditioner, a copy
machine, shredder, etc., electric noise may
interfere with operation. When the connection
with the same wall socket is unavoidable,
please use a commercial noise filter or a
commercial noise cut transformer.
z
Use the attached power cord and insert it
directory with the ground terminal. Do not use
power cords intended for other products with
this machine.
z
Do not use an extension cord. When use is
unavoidable, use a cord rated higher than 15A.
z
Use of an extended cord may cause AC
voltage decrease and interfere with normal
operation.
z
During printing, do not shut off the power
supply or pull out the power supply plug.
z
When not in use for consecutive holidays or
longterm travel, pull out the power cord.
z
Do not use the attached power cord for other
products.
Power Supply Conditions
Observe the following power supply conditions.
Current: 110 - 127VAC
(Range 99 - 140 VAC)
220 - 240VAC
(Range 198 - 264VAC)
Power
frequency:
50/60 Hz ± 2%
Note
⿟ If the power supply is unstable, use a voltage regulator.
⿟
The maximum power consumption of the device is 1500W.
Check that there is sufficient voltage capacity.
⿟ Operations cannot be assured if using an uninterruptible
power supply (UPS) or inverter. Do not use an
uninterruptible power supply or inverter.