Oki BV1250, Техническое описание

Страница: 60 / 198

On-line Commands – Command List BV1250 Technical Reference
Page 16 Revision 1.0
Table 4-1: Command Summaries (Continued)
Maintenance Commands (7-1 to 7-6)
No. Name Function Argument Format Parameters
7-1 DTY Set system day and time Set DTY P1=Year (yyyy)
P2=Month/day (mmdd)
P3=Hour/minute (hhmm)
7-2 GENERATE-SYSD Generate new system file GENERATE-SYSD None
7-3 OUP Office data backup Set OUP None
7-4 REBOOT Reboot Set REBOOT
7-5 SHUTDOWN Shutdown Set SHUTDOWN None
7-6 VOLINIT Initialize flash memory (Initialize) VOLINIT P1=Volume name
.
LAN Interface Commands (8-1 to 8-10)
No. Name Function Argument Format Parameters
8-1 CALL-PORT Call signaling port number Set SET-CALL-PORT P1=Call port number
Get GET-CALL-PORT None
8-2 FIREWALL-CHECK Check firewall FIREWALL-CHECK P1=Firewall IP address
8-3 H245-PORT H.245 port number Set SET-H245-PORT P1=H.245 port number
Get GET-H245-PORT None
8-4
NOCTIME
Call setup timeout Set
SET-NOCTIME
P1=Call setup timeout
Get GET-NOCTIME None
8-5 RTCPINFO RTCP information Get RTCPINFO P1=Port number
*
8-6 RTP-HEAD Voice RTP protocol Set SET-RTP-HEAD P1=Port number
P2=RTP type (H.323 or Oki)
Get
GET-RTP-HEAD
P1=Port number
*
8-7
RTP-PORT
RTP starting port number Set
SET-RTP-PORT
P1=RTP port number
Get GET-RTP-PORT None
8-8 TEST-PORT Retrieve firewall port test Get GET-TEST-PORT None
8-9 UPLINK Uplink parameters Set SET-UPLINK P1=Regular period
P2=Error period
P3= Number of errors to fail
P4=Number of successes to recover
Get GET-UPLINK None
8-10 VOICECOND Voice condition Set SET-VOICECOND P1=voice condition parameter
Get
GET-VOICECOND
None
FXO Interface Information Commands (9-1 to 9-3)
No. Name Function Argument Format Parameters
9-1 CO-ATDRP CO auto-dropout time Set SET-CO-ATDRP P1=Dropout time (secs.)
(FXO Only) Get GET-CO-ATDRP None
Reset
RST-CO-ATDRP
None
9-2 DID-TIM DISA response time Set SET-DID-TIM P1=Response time (0-10 sec.)
(FXO Only) Get GET-DID-TIM None
9-3
TONE-DET
(FXO Only)
Command to set FXO
interface parameters Set
SET-TONE-DET
P1=Tone detection type
P2= Tone detection time (0 is no
detection)
Get
GET-TONE-DET
None
*
Optional