Oki BV1250, Техническое описание

Страница: 163 / 198

Oki BV1250 Technical Reference On-line Commands – Reports
Revision 1.0 Page 119
Item 6-3:
HIST
CLASS Report command
FUNCTION
Command to get Call Detail Record
CHARACTERISTICS
HIST
Displays Call Detail Record report for BS12200 unit for specified day
Input Parameter(s):
P1 - Day of the week input as a number from 0 to 6 where 0=Sunday, 1=Monday, 2=Tuesday, 3=
Wednesday, 4=Thursday, 5=Friday, and 6=Saturday
Output Parameter(s):
Displays, for the specified day, unit call history including the data listed below
20
. See tables below.
•
Data number
•
Telephone number
•
Destination telephone number (Office code + Extension no.)
•
Destination IP address
•
Speech start time
•
Speech end time
•
Speech time
•
CODEC/Fax identification (C0: Codec no. 0; C1: Codec no. 1; C2: Codec no. 2; C3: Codec no.
3; F0 ~ F3: Fax; EX: Extension; E0: Fax extension)
•
Distinction between call origination (sender) and call termination (receiver) (S/R)
•
Disconnection cause (Cause)
•
Log file (report) date and day (e.g. Sun, Mon, Tue, Wed, Thu, Fri, Sat)
21
NOTE
The terminal display mode can be set by the SET-LST-MOD
command to select between continuous and paged displays. See the
SET-LST-MOD command.
ACCESS
HIST: RS-232C and LAN
20
If an incomplete call is reported, an * replaces the completion date and time.
If terminal hunt is configured, the sending side displays the dialed number and the receiving side displays the
last call received. In this case, the contents of the sending and receiving sides may not match.
21
If file is not available for specified date ****/**/** is displayed.