Oki B721, Руководство пользователя

Страница: 34 / 156

- 34 -
Loading Paper
2
Printing Basic Oper
ation
ABC
Load the paper, with the orientation
shown in the figure below.
Note
● The paper may be wrinkled or curled after printing.
● Use paper stored in proper temperature and humidity
conditions. Do not use paper that is curled or waved
because of humidity.
● Do not print on the back side of paper on which other
printer has printed.
● Curling of an envelope may cause the toner problem.
Use an envelope that is not curled. Correct curling of an
envelope within 2 mm.
● Printing an envelope with an adhesive flap bent cause the
toner problem. Correct bend of the flap before using such
an envelope.
7
Close the paper set cover (5).
5
If always printing on the same size or type of
paper from the MP Tray, register the paper on
the operator panel ( “Registering Custom Sizes”
P.35
.
) If printing once, proceed to “3. Printing”
page 54
.
Note
● When the printer is in power saving mode, press the
< POWER SAVE > button to restore from the mode.
● Make sure that the message “Ready To Print” is displayed
in the operator panel. If the message is not displayed,
press the < ON LINE > button.
8
Press the < Fn > key.
9
Enter “90” using the ten-key pad, then
press the < ENTER > button.
䣈䣷䣰䣥䣶䣫䣱䣰䢢䣐䣷䣯䣤䣧䣴
䣇䣰䣶䣧䣴
䢢
䢳䢯䢵䣦䣫䣩䣫䣶䢢䣐䣷䣯䣤䣧䣴
10
When [ Paper Size ] is displayed, select
the size of the loaded paper and then
press the < ENTER > button.
䣃䢸
䢬
䢢
䣃䢷
䣄䢷
䣃䢶
䣒䣣䣲䣧䣴䢢䣕䣫䣼䣧䢢䢢䢢䢢䢳䢱䢸
Reference
● If [ Custom ] is selected for [ Paper Size ], you need
to register the custom size. For how to register the
custom size, refer to “Registering Custom Sizes”
P.35.
11
Press the < BACK > button until
[ MPTray Config ] is displayed.
䣏䣒䣖䣴䣣䣻䢢䣅䣱䣰䣨䣫䣩䢢䢢䢢䢳䢱䢳
䣒䣣䣲䣧䣴䢢䣕䣫䣼䣧
䣏䣧䣦䣫䣣䢢䣖䣻䣲䣧
䣏䣧䣦䣫䣣䢢䣙䣧䣫䣩䣪䣶
䣖䣴䣣䣻䢢䣗䣵䣣䣩䣧
12
Press the scroll button several times
to select [ Media Type ] then press the
< ENTER > button.
䣏䣒䣖䣴䣣䣻䢢䣅䣱䣰䣨䣫䣩傍䢢䢳䢱䢳
䣒䣣䣲䣧䣴䢢䣕䣫䣼䣧
䣏䣧䣦䣫䣣䢢䣖䣻䣲䣧
䣏䣧䣦䣫䣣䢢䢢䣙䣧䣫䣩䣪䣶
䣖䣴䣣䣻䢢䣗䣵䣣䣩䣧