B710 B720 B730 User’s Guide > 109
Load Paper Tray 2
A user prompt that paper needs to be put into
Tray 2.
Load Paper Tray 3
A user prompt that paper needs to be put into
Tray 3.
Load Paper Tray 4
A user prompt that paper needs to be put into
Tray 4.
Lower Switch
Face Up Tray Failure.
Main Motor Fail
Displayed for Main Motor Failure.
Maintenance Reqd
Used for error/warning when Maintenance is
required (replace fuser/rollers/etc.)
Misfeed Jam
Paper jam detected inside the printer.
Net Comm Error
Error Message used to report Network Interface
Communication Failure.
Net: Error
Used for display of Network Interface error code
(Net1: Error yy)
NVRAM Failure
NVRAM failure message.
Offset Tray
Optional face-down output tray (offset-capable)
Offset Tray Fail
Error message displayed for Offset Tray Unit
Failure.
Offset Tray Full
Error message displayed when optional output
bin is full
Offset Tray Jam
Paper jam detected. Error message displayed for
Offset Tray Jam
Out of Memory
Error displayed when there is insufficient
memory to print a page or job.
Output Tray Full
Error message displayed when output tray is full
Paper Low Tray 1
Tray 1 is low on paper.
Paper Low Tray 2
Tray 2 is low on paper.
Paper Low Tray 3
Tray 3 is low on paper.
Paper Low Tray 4
Tray 4 is low on paper.
Paper Out Tray 1
Tray 1 has no paper
Paper Out Tray 2
Tray 2 has no paper
Paper Out Tray 3
Tray 3 has no paper
Message
Condition/Reason/Action
Содержание B710
