Okayo GPA-680, Руководство пользователя

Страница: 7 / 24

SET
DIGITAL
CH.A CH.B
1 5 4 3 2
B
A
Digital wireless receiver module DR-600
1. LCD display
(channel number/
signal strength/
Channel battery meter)
A
2. volume Channel A
3. Channel selection
4. Set key
5. Channel B volume
Operation
Power on and Off
1. Receiver module powers on along with the PA LCD displays On and after
to 2 seconds, screen displays channel number. , , 1
2. Receiver module powers off along with the PA, LCD displays Off, after 2 to 3
seconds the display shuts off.
Channel changing
1. Hold on to SET key to enter channel changing mode, once the channel number on
the display starts to flash, you may use the up and down key to select channel.
2. After confirming the channel, press SET key again, or it also auto confirms
without pressing any keys within 10 seconds.
Operating range Hi/Low setting
1. In off mode, press SET key and power on the PA to enter the setting mode.
2. Now the screen flashes Hi or Lo, press up or down key to switch in between.
3. Press SET key again to confirm, or it also auto confirms without pressing any
keys within 5 seconds.