OHTAKE FM-36 Series, Инструкция по эксплуатации

Страница: 7 / 26

4. Identifying the Unit Type
Before using the feeder, check to make sure that the nominal diameter of the working screw meets the unit type.
To identify the unit type, remove the front cover and the rail assembly and look at the labels affixed to the rail assembly and the
cutting disc assembly.
This feeder can be customized to screws of different sizes by replacing the rail assembly and the cutting disc assembly.
– 7 –
This feeder ships factory-adjusted to handle pan-head screws.
If the feeder requires adjustment to meet the kind of screw to use, make
the following checks and adjustments beforehand:
Brush check and adjustment
Passage plate check and adjustment
Retaining plate check and adjustment
Rail assembly and cutting disc assembly check and adjustment
Identification seal
Identification
seal
FM-36 FM-3630 3.0 FR30 F30 W3630
FM-3635 3.5 FR35 F35 W3635
FM-3640 4.0 FR40 F40 W3640
FM-3650 5.0 FR50 F50 W3650
FM-3660 6.0 FR60 F60 W3660
Unit
model Unit type
S c r ew
nominal
diameter
Rail model
number
Cutting disc
model
number
Passage
plate model
number