Contents
1. Introduction ......................................... 3
2. Operating Tips..................................... 3 6. Maintenance ............................................................................. 15
Precautions in Ejecting Screws ..........5 7. Replacing Parts ....................................................................... 16
3. Component Nomenclature ................ 6
8. Points to Check Before Requesting Repair Services ........... 18
4. Identifying the Unit Type ..................... 7
9. Principal Specifications ........................................................... 23
5. Getting the Feeder into Motion ........... 8
10. Warranty Terms ........................................................................ 24
1. Introduction
Thank you very much for purchasing our automatic volumetric screw feeder, ORK Feeder FM-36.
Please check up the accessories supplied with it before using it.
Accessories
Instruction manual:
1 copy
AC adapter:
1 pc
Allen wrench:
1 pc
Screwdriver: 1 pc
Before using your product, please read this manual carefully to get the bets out of the product.
2. Operating Tips
Installation Location
Install the feeder in a level, stable place.
If the feeder is installed in an unstable place, it could fall down, resulting in physical injury.
Do not use the product in a combustible gas, explosive gas or damp atmosphere.
Use of the feeder in such an atmosphere would be most hazardous.
When Shutting Down or Before Leaving the Feeder Out of Service for Long
When shutting down the feeder at the end of each day’s work or before leaving it out of service for extended
periods of time, disconnect the AC adapter from the plug outlet.
Caution
Caution
Caution
– 3 –
