Ohkura RM10C, Инструкция по эксплуатации

Страница: 51 / 119

―
50
―
HXPRM10mnC0001E
(4) (Square Root)
Caluclates the square root of Volt input, and scaling that value.
Setting the unit is possible. (See 7.1.3 on page 58)
Example) When setting the voltage of 0 to 40 mV and scale of 000.00 to 100.00 for Channel 1.
Hold down the
“
MENU
”
key for 3 seconds or more
to enter the setup mode. Use the
△
key to display
" ". Press the
“
ENT
”
key.
Use the
△
key to select the channel you want to set.
Press the
“
ENT
”
key.
Use the
△
key to select " ". Press the
“
ENT
”
key.
Use the
△
key to select a range(50 mV). Press the
“
ENT
”
key.
Use the
△
key to select a numeral. Use the key
to shift a digit. Press the
“
ENT
”
key.
Use the
△
key to select a numeral. Use the key
to shift a digit. Press the
“
ENT
”
key.
Use the
△
key to select a numeral. Use the key
to shift a digit.
Press the key again in the lowest digit(right end)
to blink a decimal point. Use the
△
key to select a
decimal point position. Press the
“
ENT
”
key.
Use the
△
key to select a numeral. Use the key
to shift a digit. Press the
“
ENT
”
key.
Press the
“
ENT
”
key. Setting is completed. To
return to the user mode, hold down the
“
MENU
”
key for 3 seconds or more.
[Note]
An entry of an incorrect numeral displays errors or or
.
Press the
“
ENT
”
key and re-enter a correct numeral.
FEED
PRINT
MENU
ESC
3sec
PRINT
ENT
PRINT
ENT
PRINT
ENT
PRINT
ENT
FEED
PRINT
ENT
FEED PRINT
ENT
FEED
PRINT
ENT
PRINT
ENT
ENT
FEED
(Span input value)
(Zero input value)
(Zero-side scale value)
(Decimal point)
(Span-side scale value)
Display Operation keys Description