Ohio Medical Moblvac III-cs, Техническое обслуживание оператора

Страница: 5 / 20

Ohio Medical Corporation, 1111 Lakeside Drive, Gurnee, Il 60031-4099 (800)662-5822—Fax: (847) 855-6218
www.ohiomedical.com —– 550107 (Rev.5) 08/2005
5
OR
Chest Drainage Units With Built In Flow Adjustment Valves.
Place the Chest Drainage Unit in the “optional” Ohio Medical Chest Drainage Unit Bracket. Ensure
that tubing is connected from the “VACUUM PORT ASSEMBLY” of the Moblvac
®
III-cs to the vac-
uum port tubing of the Chest Drainage Unit.
1.
Open the vacuum port located at the top of the backpole assembly and place your figer over the
outlet.
2.
Turn the Moblvac
®
III-cs ON .
3. Adjust
the Moblvac
®
III-cs to a low vacuum setting by using the “VACUUM REGULATOR”
knob.
NOTE: The vacuum level provided to the chest cavity is regulated by the
Chest Drainage Unit . Set-
ting the Moblvac to a low vacuum level ensures that you are producing sufficient vacuum to properly
operate the chest drainage unit.
4.
Open the vacuum port located at the top of the backpole. Adjust the Ohio Medical needle
valve or Chest Drainage Unit (per the manufacturers’ instructions) as necessary and proceed
with the suction procedure.
REPROCESSING AND CLEANING INSTRUCTIONS
1.
Discard all contaminated parts after any suctioning procedure. These components may include
the collection canister, disposable chest drainage unit, in-line filter, exhaust filter, and all suc-
tion tubing.
2.
Wipe the surface of the unit clean with a mild antiseptic and a clean soft cloth.
3.
Place a new collection canister, suction tubing, and filters with the Moblvac
®
III-cs.
4.
Check the air inlet filter at the back of the unit to see that it is clear of any dirt. If cleaning is
necessary simply “pop off” the filter cover so the filter can be vacuumed or, if the dirt is exces-
sive, washed in a mild antiseptic and thoroughly rinsed in water. After the filter is completely
dried, reinstall the filter and snap the cover back into place.
5. Inspect the overflow trap assembly for any evidence of an accidental overflow. If an overflow
has occurred, use the following guidelines.