OHAUS TP200S, Инструкция по эксплуатации

Страница: 99 / 116

46
Print Numeric Data Only Print Numeric Data Only
Print Numeric Data Only Print Numeric Data Only Print Numeric Data Only
This submenu is used to select numeric
data only, or full display data for RS232
output. Set this feature ON to output nu-
meric display data only, or OFF to output
full display data as follows:
1. Access the Nu submenu to display
the current status.
2. Press to change the status.
3. Press to accept the displayed
status.
When is released, NU will be dis-
played again and the Print menu will be
returned.
List List List List List
This submenu can be used to output a
listing of current menu settings via the
RS232 interface. When selected, menu
settings for both the Setup and Print menus
will be output. To obtain a listing of current
settings, press when LIST is dis-
played.
End End End End End
You must use End to exit the Print menu.
Changes you make in the Print menu
Changes you make in the Print menu
Changes you make in the Print menu Changes you make in the Print menu Changes you make in the Print menu
are only stored in memory if you use
are only stored in memory if you use
are only stored in memory if you use are only stored in memory if you use are only stored in memory if you use
End
End End End End
To exit the Print menu and store your
selections, press when END is dis-
played. The balance will be returned to
normal weighing operations.
MODE MODE
MODE MODE MODE
ON ON ON ON ON
TARE TARE
TARE TARE
TARE
ON ON
ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE
TARE TARE
TARE
ON ON
ON ON
ON
TARE TARE TARE TARE TARE