OHAUS TP200S, Инструкция по эксплуатации

Страница: 69 / 116

16
To view the weight or gross percentage of
the load on the pan, press .
Weight will be displayed in the weighing
unit selected in PCTT ALT in the Setup
menu.
6. Place the reference load in the con-
tainer (or directly on the pan if no
container is used).
7. Press .
8. The display will show the reference
load as the percentage you selected.
NOTE: NOTE: NOTE: NOTE: NOTE: To exit or restart percent weighing
at any time, press and hold until
PCT CON is displayed, then release it.
Return to step 2 to restart, or press
ON ON
ON ON ON
TARE TARE TARE TARE TARE
ON ON
ON ON
ON
TARE TARE TARE TARE TARE
to change to another weighing mode.
9. Remove the reference load from the
balance and replace it with another
load.
10. The second load will be displayed as
a percentage of the reference.
The reference weight may be viewed at
any time by pressing and holding .
MODE MODE MODE MODE MODE
PRINT PRINT
PRINT PRINT
PRINT
MODE MODE MODE MODE MODE