background image

EXPLORER BALANCES 

 

EN-151 

 

 

ISO 9001 Registration 

In 1994, OHAUS Corporation, USA, was awarded a certificate of registration to ISO 9001 by Bureau Veritus Quality 
International (BVQI), confirming that the OHAUS quality management system is compliant with the ISO 9001 
standard’s requirements.  On June 21, 2012, OHAUS Corporation, USA, was re-registered to the ISO 9001:2008 
standard. 

 

 

Disposal 

In conformance with the European Directive 2002/96/EC on Waste Electrical and Electronic 
Equipment (WEEE) this device may not be disposed of in domestic waste. This also applies to 
countries outside the EU, per their specific requirements. 

The Batteries Directive 2006/66/EC introduces new requirements from September 2008 on 
removability of batteries from waste equipment in EU Member States. To comply with this 
Directive, this device has been designed for safe removal of the batteries at end-of-life by a 
waste treatment facility. 

Please dispose of this product in accordance with local regulations at the collecting point 

specified for electrical and electronic equipment. 

If you have any questions, please contact the responsible authority or the distributor from which 
you purchased this device. 

Should this device be passed on to other parties (for private or professional use), the content of 
this regulation must also be related. 

For disposal instructions in Europe, refer to 

www.ohaus.com

 , choose your country then search 

for WEEE. 

Thank you for your contribution to environmental protection. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание EX124





























































































































































Отзывы: