EN-102
EXPLORER BALANCES
5.9.4
Handshake
Set the flow control method.
NONE
= no handshaking
XON-XOFF
= XON/XOFF handshaking
HARDWARE
= hardware handshaking (COM1 menu only)
5.9.5
Alternate Command
Enter this sub-menu to set a different command character for the P (Print), T (Tare) or Z (Zero)
commands.
Note:
The selected character can only be used for one command.
Alternate Print Command
Set the alternate command character for Print.
Settings of A to Z are available. The default setting is
P
, except T&Z.
Alternate Tare Command
Set the alternate command character for Tare.
Settings of A to Z are available. The default setting is
T
, except P&Z.
Alternate Zero Command
Set the alternate command character for Zero.
Settings of A to Z are available. The default setting is
Z
, except P&T.
Print Settings Menu:
Note:
If LEGAL FOR TRADE is set to ON, the print Output-Stable setting is not reset.
5.9.6
Print Output
Print Stable Weight Only
Set the printing criteria.
OFF
= values are printed immediately, regardless of stability.
ON
= values are printed only when the stability criteria are met.
Print Numeric Value Only
Set the printing criteria.
OFF
= All data values are printed
ON
= Only numeric data values are printed