EN-5
Catapult 1000 Series Scales
NET weight. When removing both the sample and container from the scale, a
negative value may be displayed. Zero the scale again before subsequent usage.
NOTE:
The
ON/ZERO
Off
button will perform a true zero setting function when
displayed values are 2% of full capacity. Above 2%, the range is limited to
full capacity by subtraction.
3.3 Changing Units of Measure
Press the
UNITS
Cal
button to display the next available measuring unit.
3.4 Auto Shut-Off
To extend battery life, the scale will automatically turn off after approximately four
minutes of inactivity. This feature is only active during battery operation.
3.5 Dynamic Weighing
With the platform empty, short press the
UNITS
Cal
button
to cycle through the units. Dynamic mode is active when
the indicator • is flashing.
Place a mass on the platform. The scale will show “-A-”.
NOTE:
If using a container, press
ON/ZERO
Off
to tare the
weight and return to zero.
With a mass on the platform or container, a short press of
UNITS
Cal
will start the averaging countdown from 5
seconds.
The averaged weight is then displayed. The indicator •
stops flashing when the process is complete.
The display will hold until a button is pressed.
To repeat the process press
UNITS
Cal
with a mass on the
platform or container.
To Exit, remove the mass from the platform or container and
press
UNITS
Cal
.
Содержание Catapult 1000 Series
Страница 2: ......
