OHAUS A32P3T series, Инструкция по эксплуатации

Страница: 14 / 84

EN-12 Aviator 3000 Series
4.8 PLU Function (Price Lookup)
The PLU function is used for quick storage and recall of the unit price and
tare value of frequently sold goods. There are two ways to enter PLU data:
a) via the
PLU key, and b) via the Memory (M1…M12*) keys.
*: Version A has M1-M16.
4.8.1 PLU Function via the PLU Key
The unit price is looked up by simply entering the PLU number via the
numeric keypad. The PLU function can store up to 100 PLU’s.
4.8.1.1 Storing a PLU
1. Enter the Unit Price, and/or Keyboard Tare value (Section
4.5.1).
2.
Press and hold [PLU] until the long beep. “PLu” will be
displayed.
3.
Enter the PLU number (1-100). The scale beeps twice,
indicating that the PLU data was stored.
4.8.1.2 Recalling a PLU (with auto-PLU search function
on – Sec. 5.2)
Enter the PLU number with the pre-stored data, then press [PLU].
The corresponding Unit Price/Tare value will be displayed.
4.8.1.3 Recalling a PLU (with auto-PLU search function
off – Sec. 5.2)
Press [PLU], then the PLU number with the pre-stored data. The
corresponding Unit Price/Tare value will be displayed.
Note: If entering a PLU number with no stored data, “
noPLu
” will
show momentarily in the Weight display.
4.8.2 PLU Function via the Memory Keys
The scale has up to 16
memory keys M1…M12 or M16 to store and recall
up to 12 or 24
…36 PLU’s according to the version (see above) and
depending on the setting in the setup mode (section 5.2). The M-keys can
be used together with the pull-out tab (where the PLU information can be
written for quick reference).
4.8.2.1 Storing a PLU into Memory
1.
Enter the Unit Price, and/or Keyboard Tare value (Section
4.5.1).
2.
Press and hold the desired M-key until the long beep (any pre-
existing stored data in that memory location will be overwritten).