2
Warning Symbol
Using the Manual
This Symbol calls attention to an operating procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in personal injury, damage or destruction to part or all of the product and system. Do not
proceed beyond a warning symbol until the indicated conditions are fully understood and met.
Installer
System Designer
Read Chapter 1, 2
Read All Chapters
NOTE:
It is strongly recommended that a process incorporates an FM approved LIMIT CONTROL like the ETR-9040
or ETR-3 which will shut down the equipment at a preset process condition in order to preclude any
possible damage to individual components or system.
Information in this user's manual is subject to change without notice.
Copyright
October, 2006, Chromalox, Inc., all rights reserved. No part of this publication may be reproduced,
transmitted, transcribed or stored in a retrieval system. Similarly, this manual may not be translated into any language
in any form by any means without the written permission of
.
©
Chromalox, Inc
