Oerlikon CENTER TWO, Руководство по эксплуатации

Страница: 72 / 102

Computer interface
GA 09.035/6.02 - 07/2011 - © Oerlikon Leybold Vacuum
71
6.3.15 HVC
High vacuum circuit on/off. Switch the high vacuum circuit of transmitters
on/off. See Chapter 4.4.3 Control button functions,
29.
S: HVC[,a,b,c]<CR>[<LF>]
R: <ACK><CR><LF>
S: <ENQ>
R: a,b,c<CR><LF>
Note:
In order to switch a transmitter on/off, the transmitter control must be set
to «Hand». See Chapter 6.3.26 SC1,
77.
6.3.16 ITR
Read a data string from the ITR/CTR 100/CTR 101 transmitter.
The measurements of the ITR/CTR 100/CTR 101 are transferred digitally. A
data string consists of 8 bytes (hexadecimal numbers) which are separated
from each other by a comma. See Reference [6]. The data strings of the trans-
mitters are separated from each other by double space characters.
S: ITR<CR>[<LF>]
R: <ACK><CR><LF>
S: <ENQ>
R: aa,aa,aa,aa,aa,aa,aa,aa bb,bb,bb,bb,bb,bb,bb,bb cc,cc,cc,cc,cc,
cc,cc<CR><LF>
Parameters Significance
a Transmitter 1
0 = Off
1 = On
b Transmitter 2
(see above)
b Transmitter 3
(see above)
Parameters Significance
aa,aa,aa,aa,aa,aa,aa,aa Data string of transmitter 1
bb,bb,bb,bb,bb,bb,bb,bb Data string of transmitter 2
cc,cc,cc,cc,cc,cc,cc,cc Data string of transmitter 3