JBL Enhancement
TOYOTA Tundra
Procedure
Issue B 02/16/18
Page | 8
e. Check for white snaps that may not have came off
with the panel. Re-insert to panel if applicable.
f. Using a 17mm socket, remove the four (4) driver
side 17mm rear seat bolts. Reposition rear driver
side seat out of the way or remove from vehicle.
Take care not to scratch interior if removing seat
assembly.
(Fig. 8-5)
g. Remove the lower seatbelt mounting bolt cover
and bolt (14mm) of the driver side/rear panel.
(Fig.
8-6)
h. Remove the weather-stripping on the rear driver
side door and remove side/rear panel.
(Fig. 8-7)
i. Disengage the white plastic clips in the front and
rear driver side threshold area.
j. Remove the factory JBL sub with a 10mm sockets
and remove the three (3) factory M6 bolts. You will
be using these same bolts for securing your O+
Subwoofer System to the vehicle.
(Fig. 8-8)
Fig. 8-5
Fig. 8-6
Fig. 8-7
Fig. 8-8
