![OE Max Controls CSDP Plus Скачать руководство пользователя страница 123](http://html1.mh-extra.com/html/oe-max-controls/csdp-plus/csdp-plus_user-manual_3398524123.webp)
125
If the voltage of the external battery of the absolute
encoder is less than 3.1V, this warning will occur.
Please replace the battery.
If the Q type absolute encoder revolves in either
forward or reverse direction more than 32768 (4096
times for H type) times, this warning will occur.
Reset the absolute encoder.
If the motor revolves faster than 100 RPM when the
main power supply is engaged, this warning will
occur. This warning will occur only when the serial
absolute encoder is used. When the resolution of
the 1 revolution data becomes 17-bit, the warning
will be automatically canceled.
If the external torque command is over 300% of the
rated torque, this warning will occur. Even if the
torque command is more than 300% of the rated
torque, the servo drive automatically limits it under
300%.
When the external torque command is lowered below 300%, this
warning will automatically canceled.
If external speed command is input at more than
the preset limit speed of drive, this warning will
occur. If speed command is input at more than the
limit speed, servo drive is limited to the
automatically preset limit speed.
When the external speed command is lowered
below the speed limit, the warning will be
automatically canceled.
If input signal (or output signal) is allocated
duplicately to the same input channel (or output
channel), /C-SEL signal is not allocated while
operated in combination control mode and
/C-DIR, /C-SP1, /C-SP2, /C-SP2 signals are not
allocated while operated in contact control mode,
this warning will occur. Check the wiring and signal
allocation and approve the power again.
Содержание CSDP Plus
