FIG. 8
Next, attach the
Front Upright (#3)
to the
Base Frame (#2)
, in
the position as shown above, and secure it into place using one Hex
Head Cap Screw 3/8-16 X 2 3/4 (#91), two Flat Washers SAE 3/8” (#71)
and one Nylon Insert Jam Lock Nut 3/8-16 (#82). Next, insert one Plastic
Insert Cap 2” Sq. (#66) into the tube-end of the
Front Upright (#3)
.
Loosely Fasten
: Do not completely fasten this hardware
assembly at this time, as it will be completely fastened later in the
assembly process.
FIG. 7
Next, insert two Plastic End Caps 2” Sq. w/Groove (#65) onto
each tube-end of the
Rear Upright (#4)
, as shown above.
Next, attach
the
Rear Upright (#4)
to the
Base Frame (#2)
and secure it into place, as
shown in caption above, using one
Support Plate 1/4 X 2 X 5 (#32)
, two
Hex Head Cap Screws 3/8-16 X 3 1/4 (#89), four Flat Washers SAE
3/8” (#71) and two Nylon Insert Lock Nuts 3/8-16 (#81).
Loosely Fasten
: Do not completely fasten this hardware
assembly at this time, as it will be completely fastened later in the
assembly process.
FIG. 9
Next, attach a Nylon Pulley 4 1/2 Rd. (#64- Labeled D) to the
pulley plate located on the
Front Upright (#3)
and secure it into place
using one
Cable Retainer Bracket L-Shaped (#28)
, one Hex Head Cap
Screw 3/8-16 X 1 3/4 (#93), two Flat Washers SAE 3/8” (#71) and one
Nylon Insert Jam Lock Nut 3/8-16 (#82). Refer to the Exploded View
Diagram on page 26 for further illustration of this assembly.
Note:
Be sure to position the
Cable Retainer Bracket L-Shaped
(#28)
as shown in caption above.
Next, attach two Nylon Pulleys 4 1/2 Rd. (#64-Labeled F,R) into the pulley
brackets located on the
Front Upright (#3)
and secure them into place
using two Hex Head Cap Screws 3/8-16 X 2 1/2 (#92), four Flat Washers
SAE 3/8” (#71) and two Nylon Insert Jam Lock Nuts 3/8-16 (#82).
Owner’s Manual: Assembly Instructions
LOOSELY FASTEN
LOOSELY FASTEN
FIG. 10
Next, locate the
Leg Extension Bench Frame (#11)
and
secure it to the
Front Upright (#3)
, as shown above, using one Hex Head
Cap Screw 3/8-16 X 2 3/4 (#91), two Flat Washers SAE 3/8” (#71) and
one Nylon Insert Jam Lock Nut 3/8-16 (#82). Locate the
Stabilizer
14” (#29)
and insert one Plastic End Cap 2” Sq. w/Groove (#65) into the
tube-end.
Secure the other end of the
Leg Extension Bench Frame
(#11)
to the
Base Frame (#2)
and the
Stabilizer 14” (#29)
using one Hex
Head Cap Screws 3/8-16 X 5 (#86), two Flat Washers SAE 3/8” (#71) and
one Nylon Insert Lock Nut 3/8-16 (#81). Next, secure the other end of the
Stabilizer 14” (#29)
to the
Base Frame (#2)
using one Hex Head Cap
Screw 3/8-16 X 3 (#90), two Flat Washers SAE 3/8” (#71) and one Nylon
Insert Lock Nut 3/8-16 (#81). Next, insert one Plastic Insert Cap 2” Sq.
(#66) into the tube-end of the
Leg Extension Bench Frame (#11)
.
Loosely Fasten
: Do not completely fasten this hardware
assembly at this time, as it will be completely fastened later in the
assembly process.
LOOSELY FASTEN
ODY-5 Odyssey Home Gym
4
Содержание ODY-5
