OCULUS Binoptometer 4P, Инструкция по эксплуатации

Страница: 37 / 60

9 Conducting an Examination
Instruction Manual Binoptometer® 4P (G/59860/1016/en) 33 / 55
9.5 Display and Print Results
You can view the test results.

To do so, press this button
☞
You can display and print out details of the visual acuity test, the colour
tests and the Amsler test. The respective settings must be activated for
this purpose, see
sec. 9.2, page 20 .
Then you can print the test results.

To do so, press this button
You can find more information in the User Guide .
If you do not have a printer connected, you can save the data on a USB
stick and print them later from a different netbook, laptop or PC. The
Binoptometer® 4P software must be installed on the other device. For
more information, see
“Exporting Results via the Patient Data
Management” page 36 .
9.6 Finishing the Exam

Press the [Back] button.

Press the appropriate button:
[Save], the examination is saved
[Do not save], the examination is not saved
[Cancel], return to the examination
The Binoptometer® 4P Overview menu is displayed.
You can start a new examination (sec. 9.4, page 31) or switch over to
a new patient. To do this, press the button [Select patient].

Clean and disinfect forehead rest after each exam, sec. 11.1, page 38 .

Set the viewing angle to 0 degrees, to perform the next examination.