OCULUS Binoptometer 4P, Инструкция по эксплуатации

Страница: 19 / 60

8 Daily Startup
Instruction Manual Binoptometer® 4P (G/59860/1016/en) 15 / 55
8 Daily Startup
To start the Binoptometer® 4P for daily operation, you must:

Install and connect the device

Check the device viewer

Turn on the device
Note:
Risk of equipment damage due to incorrect transport

Check the Binoptometer® 4P after each transport and before any
examinations for damage.

Label the damaged Binoptometer® 4P as "out of order”.

Report the damage to the service department.

Use only undamaged Binoptometer® 4P devices.
8.1 Setup and Connection for Daily Operation
The ambient conditions are given in “Ambient Conditions” page 48 .

Take the Binoptometer® 4P from the trolley / bag. Lift it with the
handhold (1).

Place the Binoptometer® 4P on a level surface.

Position the Binoptometer® 4P so that the patient is not affected by
sunlight or artificial light sources.

Avoid reflections in the lenses of the patient and viewers, e.g.
through windows or mirrors.
Caution
Interruption of the examination due to overheating
If the unit overheats, it shuts itself off and the test results are lost.

Do not cover the ventilation openings.

Connect the Binoptometer® 4P, sec. 7.2, page 13 .
Fig. 8-1: Take out the unit
1