CONTROLLER
KITs
.
2021 INSTALL & OPERATION MANUAL
3
1
Overview
Units are not waterproof. You must mount in a dry location. When installing, be sure that the controller fits
the area and secures to the mounting location using the appropriate hardware before installing.
1.1 TOOLS AND MATERIALS
Never use power tools. Hand tighten only!
•
Drill & Drill Bits.
•
Screw Driver, Phillips #2
•
Wire Strippers.
•
Tape measure and Ruler or Straight Edge.
•
Marking Utensil (Pencil, Sharpie Magic Marker, etc)
1.2 FINDING THE MOUNTING LOCATION
•
The mounting location needs to be carefully selected to ensure the unit will not be exposed to moisture.
•
Ensure that the ambient temperature where the unit is mounted cannot exceed 45°C - Note that engine
compartments can easily exceed this.
•
The chosen location requires access to mains power, space for the routing of the DMX cable to the driver
boxes, and also an Ethernet connection to a Wi-Fi router / LAN Wi-Fi for the Wi-Fi controller if the Wi-Fi
function is required.
For DC power installations please contact OceanLED for advice
1.3 SPECIFICATIONS
•
Ready to use (pre-loaded with scenes).
•
Glass Touch Panel with graphical colour display
•
Micro SD Card (32Gb Max)
•
6-7V DC / 100-240V AC (With Adapter)
•
Environment IP20, Temp -
10˚C to 45˚C
•
Certifications: CE, EMC, ROHS, ETL
•
Dimensions 146x106x11mm
•
Weight 247g
