CONTROLLER
KITs
.
2021 INSTALL & OPERATION MANUAL
8
3
Operation
3.1 POWER / SCENE SELECTION
1. Power on the unit by touching the top centre button.
2. Select the required scene by using the buttons under the
‘Select Area’ buttons below the display to select the
required area and select the scene by touching the left / right arrows either side of the display. Once the
required scene is selected, play that scene, press the ‘Play Scene’ button.
Select Scene
Select Area
Play Scene
Adjust scene speed
(use + or - on wheel
to change)
Tap to manually select colour
(of all lights in currently
selected area)
– Select RGB
colour on wheel & press again
to select white channel level.
When in this mode the
indicator led in the centre of
the wheel will illuminate.
Adjust overall brightness
(use + or - on wheel to
change)
Brightness / Speed
change
