CONTROLLER
KITs
.
2021 INSTALL & OPERATION MANUAL
1
Preface
READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL
WARNINGS
Before installing your DMX Controller, read and follow all warning notices and instructions which are
included. Failure to follow safety warnings and instructions can result in property damage, severe injury or
even death.
Before installing your DMX Controller, check local laws for restrictions regarding the use of coloured lights
in your area.
Salt is an inherently corrosive material. Natural and man-made surfaces are susceptible to corrosion and
deterioration when used in and around salt water. Some combinations of plastic and polymer products are
impervious to saltwater corrosion, however, screws and fasteners used for the installation must be of a
marine grade type stainless steel or equivalent and monitored annually to ensure the controller remains in
service for years to come.
Never Use Solvents! Cleaners, fuel, and other products that may contain strong solvents, such as acetone,
that attack many plastics greatly reducing their strength and can cause irreversible damage.
Units are not waterproof. You must mount in a dry location. When installing, be sure that the controller fits
the area and secures to the mounting location using the appropriate hardware before installing.
DANGER
RISK OF ELECTRIC SHOCK OR ELECTROCUTION
This unit must be installed by a licensed or certified electrician in accordance with all applicable local codes
and ordinances. Improper installation will create an electrical hazard which could result in death or serious
injury to installers, or others due to electrical shock, and may also cause damage to property. Always
disconnect the power to the light at the circuit breaker before servicing the light. Failure to do so could result
in death or serious injury to serviceman, or others due to electrical shock
