Oceanic versa Pro, Руководство по эксплуатации

Страница: 83 / 96

83
Battery Hatch and Hatch Ring Installation
• Replace the Hatch O-ring with a new one. This O-ring
must be a genuine Oceanic part that can be purchased
from an Authorized Oceanic Dealer. Use of any other O-
ring will void the warranty.
• Lightly lubricate the new Hatch O-ring with silicone grease
and place it on the inner rim of the Battery Hatch. Ensure
that it is evenly seated.
• Slide the Hatch Ring, top portion first (small opening), onto
your thumb (Fig. 94).
• Carefully place the clear Battery Hatch (with O-ring) into
position on the rim of the Battery Compartment, then press
it evenly and completely down into place with your same
thumb.
• Maintain the Battery Hatch securely in place and, using
your other hand, slide the Hatch Ring down off your thumb
and into position around the Battery Compartment. The
tabs on the Ring fit down into the slots located at the 2 and
9 o'clock positions (Fig. 95).
• Using your fingers, turn the Ring counter clockwise 5
degrees until the tabs engage, then tighten it 5 more
degrees by turning it counter clockwise with the aide of a
small blade screwdriver, pressing against the upper/left
arm of the Ring (Fig. 96).
Fig. 94 -Hatch Installation
Fig. 95 - Orientation of Hatch
Ring
Fig. 96 - Ring Installation