Oceanic versa Pro, Руководство по эксплуатации

Страница: 73 / 96

73
Fig. 81 - Set Demo Calibration
Fig. 82 - Demo Surface Mode
• Press and release the Select (Side) button to toggle be-
tween ON and OFF.
• Press and release the Advance (Front) button to accept the
setting and advance to DEMO: NI-O2 with CUR or (NEW)
flashing (Fig. 81).
• When set for NEW, calculations are based on zero
residual nitrogen and oxygen loading (a clean dive).
When set for CUR, calculations take into consideration any
residual nitrogen and oxygen remaining from previous
'actual' dives. Subsequent (repetitive) Simulated dives do
not take into consideration previous Simulated dives.
• Press and release the Select (Side) button to toggle be-
tween NEW and CUR.
• Press and release the Advance (Front) button to accept the
setting and advance to Demo Surface Mode with the
DEMO icon flashing (Fig. 82).
• Press and release the Advance (Front) button to advance to
DEMO: FO2 with Air (or a numerical value) flashing (Fig.
83).
• Press and release the Select (Side) button to advance the
FO2 setting from AIR to 21 through 50, in increments of
1%. Max Depth for PO2 of 1.60 will be displayed.
• Press and release the Advance (Front) button to accept the
setting and revert to Demo Surface Mode with the DEMO
icon flashing.
Fig. 83 - Set Demo FO2