Oceanic versa Pro Скачать руководство пользователя страница 75

Страница: 75 / 96

Ascending

Rate of Ascent can be set for 1 or 3 feet per second (fps) prior
to start of Ascent or while stopped.

• Press/hold the Advance (Front) button for 2 seconds to

access an Ascent Rate of 1 fps. The UP Arrow will appear
flashing (Fig. 86).

• To change the Rate to 3 fps, press/hold Advance (Front)

for 2 seconds. The graphic TOO FAST appears and the
alarm will sound and red LED will flash (Fig. 87).

• Press/hold the Advance (Front) button to return the Rate to

1 fps.

• Press and release the Advance (Front) button while the

Arrow is flashing to start the Ascent at the selected rate.

• Press and release the Advance (Front) button during the

Ascent to stop the Ascent.

• Press and release the Advance (Front) button while the

Ascent is stopped to access Alternate Displays.

• Press/hold the Advance (Front) button for 2 seconds while

the Ascent is stopped to restart the Ascent.

• Pressing and holding both buttons simultaneously for 2

seconds will revert operation to real Surface Mode.

Fig. 86 - Simulated Ascent

Fig. 87 - Ascent Rate Accelera-

tion

Содержание versa Pro

































































































Результаты поиска

Содержание versa Pro

Отзывы:

Похожие инструкции для versa Pro

Бренды по названию

Популярные бренды

Oceanic versa Pro, Руководство по эксплуатации

Результаты поиска

Содержание versa Pro

Отзывы:

Похожие инструкции для versa Pro

Бренды по названию

Популярные бренды